According to the state’s comp division, most private employers in Texas decide whether to carry workers’ comp at all, which makes the subscriber choice the first fork in epoxy flooring business insurance cost in Texas. With no state license setting an insurance condition, the rest follows customer contracts, grinding dust practice, solvent use and the metros your trucks cover.
Each rule, quoted from its agency, appears on our Texas epoxy flooring insurance page, and the licensing guide by state compares Texas with states that license floor work. This guide stays with price.
What a non-subscriber gives up in an employee lawsuit
Choosing not to carry comp also removes a legal limit, and that trade sits at the center of a Texas quote. The state’s comp division, housed in the Texas Department of Insurance, describes comp for private employers as a choice that is not required except in some cases, and names going without coverage as the non-subscriber path.
The division also states what that choice costs. Per the division, comp coverage caps an employer’s exposure when a worker sues over an injury, with an exception for a death caused by gross negligence, and a business that declines coverage keeps no such cap. For an epoxy crew, the injuries to weigh are concrete: a hand caught by a diamond grinder, a chemical burn from hardener, a back hurt lifting a machine onto the trailer, lungs exposed to grinding dust. Without comp, an injured worker’s claim can arrive as a lawsuit instead.
Some employers have no choice. The division says Texas governmental entities, such as public schools, cities and counties, must carry comp. Whether a public owner requires comp from the contractors it hires is not something we confirmed; read the bid documents and ask the owner.
Non-subscriber notices and the injury reports that follow
Going without coverage is not going without paperwork, and that paperwork belongs in your cost planning. A non-subscriber files a notice with the state that it lacks coverage, and files reports of some injuries and deaths with the comp division.
Forms and deadlines were not confirmed, so ask the division what it expects and when. Keep copies with your insurance file. A non-subscriber may also want to look at other ways to protect itself against employee injury suits; ask your agent what options exist for a coating business that does not subscribe, and compare them with a comp policy before you decide.
Payroll classes after you subscribe
A subscribing epoxy business pays a comp premium built on payroll, and how that payroll is described can shape it. Per the division, a subscriber’s coverage comes from an insurance company licensed in the state, and an employer can also be certified to self-insure. A workers’ compensation policy from a licensed carrier is something we can place.
A subscriber’s comp can be rated by the class of work each wage pays for. The person running the grinder and broadcasting flake may be classed differently from the estimator measuring garages and the bookkeeper in the office. Report each role where it belongs, document every subcontractor’s own coverage with a certificate, and expect an auditor to compare the payroll you reported with the payroll you paid.
Subscribing has a contract side as well. A general contractor on a commercial project may want proof of comp before your crew starts, whatever the state allows. Ask what each customer requires before choosing a path.
Claims history can weigh on a subscriber’s quote too. Bring loss runs from each prior insurer and a short note on any paid claim: what happened on the jobsite, whether the injury came from the grinder, the hardener or a lift, and what you changed in training or equipment afterward. Changes made after a loss may be read alongside the loss itself.
No state licensing credential, so contracts set the limits
Without a state license for floor coating, nothing at the state level fixes your liability limits, and customers fill that gap. In the governor’s guide to business licenses, a general contractor needs no license to work in Texas, and the state’s occupational licensing department regulates trades such as electricians and air conditioning contractors, with no category on its list for general, flooring or coating work. No insurance condition attaches to the work at the state level.
Contracts take its place. Texas customers on commercial work, from general contractors to building owners, can ask to be added as an insured, want your policy to answer first, require a waiver of subrogation, and set a limit above your base general liability. Raising the limit can mean an umbrella above liability, auto and employer’s liability. Our commercial epoxy coverage walks through those terms. Price every requirement before the bid goes in.
Homeowner garages ask for less on paper and bring completed-work claims instead: a flake floor lifting under hot tires, a slick topcoat, moisture through an untested slab. Report your actual split between home and commercial work, since an underwriter may treat them differently.
Shop space holding resin, hardener and flake between Texas jobs adds a property line, rated on construction, protection and contents value. Say how materials are stored and what alarms or sprinklers protect the space, and tell your agent if the business runs out of a home garage, since a homeowners policy may not reach business property.
Real-World Scenario: A coating company in the Houston-Pasadena-The Woodlands, TX metro runs as a non-subscriber and wins a warehouse floor from a general contractor. The subcontract asks for proof of comp, additional insured status and a limit above the company’s liability policy. Before signing, the owner asks the agent to quote a comp policy, the endorsements and an umbrella, weighs those quotes against the lawsuit exposure the company carries as a non-subscriber, and decides with the contract in hand rather than after the first certificate request.
A City of Dallas registration form of unconfirmed reach
City and county rules are the remaining licensing variable, and they remain open. Per the governor’s guide, city and county requirements may still apply to a contractor. The City of Dallas posts a registration form that general contractors and certain trades use to pull permits; flooring does not appear on it, and whether coating a floor there calls for a permit is NOT CONFIRMED.
Ask the city’s building inspection office before a first job there, and ask any other city or county the same questions: does it register contractors, does a commercial floor need a permit, and does it want a certificate of insurance on file. A missing certificate can hold up a start date.
OSHCON help and the federal inspector on a Texas slab
Federal inspectors hold the private Texas jobsite, and an underwriter may read your crew’s dust control with that in mind. Nothing on the federal roster of approved plans names Texas, so Occupational Safety and Health Administration rules govern private employers.
Silica follows the same federal line. Concrete grinding dust on a private Texas job is measured against federal OSHA’s construction standard named “Respirable crystalline silica,” with no state plan in between.
The comp division runs OSHCON, a no-cost, confidential consultation program for private employers that writes no citations or fines. Leaving an OSHCON visit with a written dust plan, grinder shrouds tied to dust-collecting vacuums, respirator fit records and ventilation for solvent primers gives a subscriber’s underwriter evidence to rate.
Ozone-area coating rules and the open floor coating question
Whether a Texas air rule caps the solvent in floor coatings remains NOT CONFIRMED, so the cost question is fumes and documentation. Texas has coating rules approved into the state’s federal air plan for factory and shop work in named ozone areas, covering categories such as metal parts, wood products and vehicle refinishing, with no architectural or floor coating category in the parts read. A key division of the rule went unread, and the nationwide federal architectural coating limits fell outside our research.
Whether any rule reaches the floor coatings you apply is a question for the Texas Commission on Environmental Quality, and solvent content is a question for your supplier. Fumes from a solvent primer in an occupied office or clinic can still draw a complaint that meets the pollution exclusion on general liability, so keep product data sheets with each job and ask whether a contractors pollution endorsement fits your commercial work.
Metro routes and jobs over the line in Arkansas, Oklahoma or Louisiana
Miles can affect commercial auto and equipment coverage. Among the Census metros covering Texas counties are Dallas-Fort Worth-Arlington, TX, San Antonio-New Braunfels, TX, Austin-Round Rock-San Marcos, TX, McAllen-Edinburg-Mission, TX and El Paso, TX. Trailer runs between them may read differently from work near the shop, so list every driver and each route.
Grinders, vacuums and generators belong on inland marine for contractors’ tools and equipment, rated on scheduled values. Out-of-state jobs in Arkansas, Oklahoma or Louisiana call for a question about how your comp choice and your liability policy apply there, since those states set their own comp rules.
Building a Texas submission around the subscriber answer
A Texas quote starts with the comp answer, so put it at the top of the file. Then bring payroll by role, your home and commercial split, the coating systems you install, loss runs, drivers and vehicles, the equipment schedule, contracts you are bidding and the cities you work in. The way the policies fit is shown on our epoxy flooring business insurance page, and a Texas quote request starts the process.