Commercial auto insurance covers the vehicles an epoxy flooring business drives for work. It pays when your truck or van injures someone or damages their car or property on the road, it can pay to repair or replace your own vehicles after a crash, theft or storm, and it defends the business when a driving claim names it. For a coating crew that is on the road every morning with a loaded trailer, it is rarely optional.
What sets this trade apart is the cargo and the people behind the wheel. A truck heading to a garage job may carry a planetary grinder, a dust collection vacuum, a propane tank and kits of resin, hardener and solvent, and the person driving it may be the owner, a crew lead or an employee running to the supplier in a personal car. This page walks through those situations and where the auto policy stops and another one starts. It is one part of an insurance program for an epoxy or garage floor coating business.
A hub-and-spoke diagram. At the center is an epoxy flooring business on the road. A spoke leads to the trucks and vans the business owns, which the business auto policy lists and covers. A second leads to the trailer, which is generally scheduled on the auto policy alongside the truck that pulls it. A third leads to a box truck or trailer the business rents, which hired auto coverage is built to reach. A fourth leads to an employee’s own car used on a supply errand, which non-owned auto coverage is built to reach behind the employee’s personal policy. A fifth leads to the grinders, vacuums and mixers carried in the trailer, which generally belong to an inland marine equipment floater rather than the auto policy. A sixth leads to resin or solvent spilled from a vehicle, which raises a pollution question the policy wording decides. Your own policy wording decides any real claim. No figures are shown.
Trucks and trailers that haul grinders, propane and resin kits
A coating business may run a short fleet: a pickup or a cargo van, perhaps with an enclosed trailer behind it that doubles as a rolling shop. That rig is heavy, and it gets heavier when the grinder, the vacuum, a generator, propane cylinders and a load of material go into it. Weight lengthens stopping distances, a trailer adds sway and blind spots, and an early start on a tight schedule adds pressure. Those are the conditions in which a rear-end collision or a turn into the wrong lane happens.
The auto policy answers for the harm your vehicles do to others on the road: injuries to drivers, passengers and pedestrians, and damage to their vehicles and property. Physical damage coverage, which can be split into collision and a broader part for theft, fire, hail and vandalism, answers for your own trucks and vans. A trailer you own can be listed on the policy too, and how it is described matters, because a trailer left off the schedule can turn a routine claim into a dispute.
Loading, unloading and the minutes at the curb
A surprising share of trouble happens when the vehicle is parked. A crew backs a trailer up a residential driveway and clips a mailbox, a ramp drops onto a customer’s foot, a drum rolls off a tailgate and dents a neighbor’s car, or a tank is wrestled down from a truck bed in a commercial loading dock while forklifts move around it. Business auto policies generally treat loading and unloading as part of using the vehicle, so injury or damage during those moments can fall to the auto policy rather than to general liability.
The handoff between the two is not always clean. Once equipment is off the truck and rolling across a garage floor, the exposure starts to look like jobsite work again. That is why the auto and the general liability policies should be read together, ideally placed so neither one leaves a gap at the curb.
When a crew member runs a supply errand in a personal car
Epoxy jobs run short of things. A crew is a kit of topcoat short, a grinding head wears out early, or the moisture meter is sitting back at the shop. Someone jumps in their own car to fix it. If that driver causes a crash on the way, the injured party may look past the driver’s personal policy to the business that sent them, and the business can also be held responsible for an employee driving on its behalf.
The employee’s personal auto insurance is generally expected to respond first. The business’s exposure sits behind it and can be larger than the personal limits, especially if someone is badly hurt. An owner may assume this is covered somewhere; it may not be unless the program includes coverage for non-owned vehicles.
Hired and non-owned auto: rented trucks and employees’ cars
Hired and non-owned auto coverage closes both halves of that gap. The hired part extends liability protection to vehicles the business rents, leases for a short period or borrows, such as a box truck rented to move equipment for a large warehouse floor or a second trailer taken for a week. The non-owned part protects the business when an employee drives their own vehicle for work, as in the supply run above.
It can be added to a business auto policy and can also be written for a business that owns no vehicles at all, which suits a newer epoxy operation that runs everything out of the owner’s personal truck while it decides whether to retitle it. Physical damage to a rented vehicle is a separate question. Some programs extend it, some leave it to the rental counter’s waiver, and the rental contract itself may shift the risk to you, so it is worth settling before the keys change hands.
The trailer is a vehicle; the grinder strapped to it is not
This is a split that can surprise coating contractors. The trailer itself is generally treated as part of the auto exposure: listed on the policy, covered for physical damage if you choose that option, and tied to the truck that pulls it for liability. Everything bolted, strapped or stacked inside it is a different matter. The planetary grinder, the edge grinder, the dust collection vacuum, the shot blaster and the mixers are your business property, and an auto policy can exclude them, so ask whether yours does.
That property belongs on an inland marine contractors equipment floater, which follows the gear on the road, at the jobsite and at the shop. If a loaded trailer is stolen from a hotel parking lot on a multi-day commercial job, the auto policy may answer for the trailer and the floater for what was inside it. Without both, one half of the loss can land on the business.
A top-to-bottom flow. It begins with a truck and trailer loaded with a grinder, a vacuum, propane and kits of resin and solvent on the way to a job. The rig is in a collision on the road. The first question is injury to other people and damage to their vehicles, which the auto liability coverage is built to answer. The next is damage to your own truck and trailer, which physical damage coverage answers where it was chosen. Then comes the equipment that was in the trailer, which generally goes to the inland marine floater. Last comes any resin, solvent or fuel that escaped onto the road or into a drain, where the auto policy’s pollution wording, or a separate pollution policy, decides whether the cleanup is covered. Your own policy wording decides any real claim. No figures are shown.
Resin, solvent and a spill on the road
Epoxy materials travel in drums, pails and two-part kits, and solvents and propane ride along. In a crash, or even a hard stop, containers can split and material can reach the roadway, a storm drain or a customer’s driveway. When that happens, the question is not only who was hurt but who pays to clean up what was released.
A business auto policy can address pollution narrowly, with limited coverage for material that escapes in an accident and little or none for a slow leak or a spill while parked. Some programs offer broader pollution wording for vehicles that carry chemicals, and a separate contractors pollution policy may or may not reach a spill from your own truck. We cannot promise in general terms that any one of these will respond; the wording on your policy decides it, and that is a part we read with you before a claim rather than after one.
Who drives, and why the driver list carries weight
An auto underwriter will ask for every driver who regularly takes the wheel of a business vehicle, with their licenses and records, and will ask what your rules are for adding new hires. A coating business may lean on seasonal crews in busy months, and a driver who is never reported can become a source of argument after a crash. Expect questions about the vehicles and trailers you run, how far your jobs spread, whether vehicles are taken home at night, how material and propane are secured, and whether anyone drives a personal car for work.
Clean records, a written vehicle policy and secured loads help with terms. A poor record on a single driver can do more harm to the quote than an extra truck.
Questions about cost, the best policy and the state you work in
Owners searching for this coverage tend to ask three things: what it costs, which policy is best, and how it works in their state. We do not publish prices or typical limits, because both are set by your vehicles, drivers, territory, cargo and contracts. The best policy is the one that matches how your business actually drives, with every vehicle and driver listed and the hired and non-owned gaps closed. And while each state sets its own auto insurance rules and minimums, the minimum is rarely what a commercial contract asks for; your state insurance department is the authority on what the law requires where you are licensed.
Fitting the auto policy to the rest of the program
Auto is one piece of a set. The floater carries the equipment, general liability carries the jobsite and the finished floor, workers compensation carries an employee hurt while driving for work, and an umbrella can sit above auto and liability when a general contractor’s requirements run higher than the underlying policies. A commercial job can ask for the auto policy on the certificate alongside the rest. See residential and commercial epoxy flooring contractor insurance for how each program puts the pieces together.