States · Illinois

Epoxy Flooring Business Insurance in Illinois

Illinois licenses roofers but not floor coaters, so the rules an epoxy business meets come from Chicago’s contractor license, the home repair law, a comp law enforced with stop-work orders, a safety plan for public worksites and a coatings rule whose federal approvals describe limits on what is sold. Below, each one sits beside the policy that answers it.

A worker pulls a squeegee through a pool of dark epoxy on a large commercial floor — epoxy flooring business insurance in Illinois

No Illinois state license covers epoxy flooring: its professional licensing department licenses roofing contractors, and nothing on its list reaches a general, building, flooring or coating contractor, whether the floor is in a home or a commercial building. Your city may license you instead, and Chicago, for one, requires its own general contractor license, backed by proof of liability insurance, for most construction, alteration and repair work inside the city. Beyond the city line, the rules an Illinois coating business meets come from the home repair law, a comp law the state enforces with stop-work orders, a state safety plan that covers public worksites and a coatings rule the federal notices describe as limits on coatings sold in the state.

Every item on that list leaves something for insurance to answer. Chicago’s license proves you carried a policy on the day you applied, not that it will respond to a floor that delaminates in a restaurant kitchen, and a coating sold as compliant can still draw a fume complaint from the tenant next door. Each Illinois rule is laid out below with the coverage that picks up where it stops.

Illinois licenses roofers, not floor coaters

Illinois’s professional licensing department issues no license for epoxy floor coating, on homes or on commercial buildings: the Illinois Department of Financial and Professional Regulation’s list of the professions it licenses carries a roofing contractor license but no general, building, flooring or coating contractor license. The department’s list includes architects, home inspectors, interior designers and engineers, each a separate profession, and roofing is the trade its contractor license names. How other states treat the same work is laid out in our guide to whether you need a license to do epoxy flooring.

So an Illinois coating business carries no state card from the Illinois Department of Financial and Professional Regulation, and there is none to apply for. Where licensing does reach you is the city. A city can license contractors too: Chicago requires a city general contractor license for most building construction, alteration and repair work in the city, and its list of regulated work includes jobs that need a city permit for grinding. The city states the rule in a sentence:

“A City of Chicago general contractor license is required to perform most types of building construction, alteration, repair, and demolition work within the City of Chicago.”

Grinding is where the city’s list touches epoxy work directly. Among the regulated activities on its license page is this one:

“Requires a permit from the Department of Public Health for sandblasting, grinding, or chemical washing”

The page does not say whether a stand-alone floor-coating job needs a city building permit, so call the City of Chicago Department of Buildings with the scope of your work, including the grinding, before you bid inside the city. Ask, too, whether your role as a sub to a licensed general contractor changes what you personally need.

Chicago’s license asks for proof of insurance up front

Chicago’s general contractor license requires proof of commercial general liability insurance in the amount set for the license class applied for, from an insurer authorized in Illinois. The application list puts it plainly:

“Proof of insurance in the amount required by the class of license applied for”

In Chicago, then, general liability is a condition of working, not just a backstop for a claim. The license class you apply for sets the amount, so tell us which class you plan to hold before you apply. Bind the policy first, ask us for a certificate worded the way the department words it, and plan on a fresh certificate every time the policy renews.

Bigger classes can call for limits a small coating business does not carry on general liability alone. That is where an umbrella earns its place: it can raise the limit over the general liability policy without rewriting the whole program. Ask the department whether an umbrella counts toward a class’s amount before you rely on one to meet it.

Outside Chicago, we read no other city’s rule. Check the permit desk of each suburb in Cook, DuPage or Lake County, and of each downstate city, you work in: ask each building department whether it licenses or registers contractors, and what it wants on a certificate, before your first job inside its limits.

An installer certification from a resin maker is a commercial credential that helps when an architect specifies that maker’s system. Hold it if your commercial work calls for it, but keep it separate in your mind from any city license, which it does not replace.

Home repair duties and commercial contracts in Illinois

On the residential side, Illinois puts duties on the contractor even with no license in play. On home jobs, the state’s Home Repair and Remodeling Act sets consumer duties, such as handing the homeowner the state’s consumer rights brochure. The Attorney General’s guide describes the brochure duty:

“The contractor must give the homeowner a copy of a brochure entitled “Home Repair: Know Your Consumer Rights,” the text of which is specified in the Home Repair and Remodeling Act.”

Make the brochure part of every garage or basement estimate packet, keep a signed copy with the job file, and pair it with a written contract that names the system, the prep and what happens if moisture in the slab turns up. Homeowners in Illinois rarely ask for a certificate, but they do remember a floor that fails. Hot tires lift a flake system laid over a lightly ground slab, winter salt turns a glossy finish slick, and moisture rising through an older basement slab blisters the coating. General liability answers those as completed-operations claims, and our residential epoxy flooring contractor insurance page explains how they are handled.

Commercial floors move the paperwork forward. A general contractor on a Chicago tower, a warehouse operator in Will County or a hospital in Peoria will want additional insured status, coverage that responds before its own, and limits that may run well past your general liability. Night and weekend pours in occupied buildings bring fume complaints and early traffic on an uncured floor. For the detail on those contract terms, see our commercial epoxy flooring contractor insurance page.

If you do some of each, give us a rough split between home garages and commercial floors, because the right program for a garage-heavy business is thinner on contract terms than a warehouse job will demand, and the reverse can carry endorsements you pay for and never use.

Comp in Illinois and the stop-work order

The comp Commission starts from who pays:

“By law, the employer is responsible for the cost of workers’ compensation benefits.”

Its handbook then lists what the law requires of an employer, beginning with the coverage itself:

“purchase workers’ compensation insurance or obtain permission to self-insure from the Commission;”

An employer that knowingly goes without coverage can be shut down by a stop-work order until it buys insurance. The handbook describes the order in its own words:

“it may issue a stop-work order and shut the company down until it obtains insurance.”

Of every rule on this page, that is the sharpest for a coating business. A stop-work order halts every job, and a floor partly finished when the crew walks off is its own liability problem. The handbook names no state fund, and it notes that most employers meet the duty by buying insurance; self-insurance needs the Illinois Workers’ Compensation Commission’s permission, so weigh that step against a policy before you count on it for a small crew. Your Illinois comp policy is one we place, with an insurer that writes floor-coating work.

The harder question is who counts. The handbook we read does not set out a test for telling an employee from an independent contractor, so do not assume a helper paid by the job sits outside the law. Ask the Commission or ask us before you treat anyone who works your floors as a contractor, and get proof of comp from any sub who brings a crew of their own.

Crossing the river or the state line deserves a call. Before a crew takes a job in Missouri, Iowa, Indiana or Wisconsin, tell us, so the policy names that state before the work starts.

Who watches an Illinois grinding crew

Illinois’s own OSHA-approved plan, IL OSHA, run by the Illinois Department of Labor, covers public-sector worksites only, so a private epoxy contractor’s crews are outside the state plan. The department’s free consultation service is aimed mainly at small and mid-size private employers in high-hazard industries. The department’s report records how the plan began:

“On September 1, 2009, the U.S. Department of Labor OSHA (OSHA) approved IDOL to become a developmental State and Local Government Plan (SLGP) for public sector worksites.”

On public worksites the state program enforces the same standards federal OSHA writes:

“The Act authorizes the enforcement of standards (General Industry, Construction, and Maritime Industries) identical to those federal standards adopted by OSHA.”

For private jobsites the answer comes from the federal side: The federal list of approved state plans lists Illinois’s plan only among the plans for state and local government employees, so private employers in Illinois fall under federal OSHA. The federal list carries the plan under this heading:

“List of Approved State Plans for State and Local Government Employees”

Grinding a privately owned Illinois slab puts your crew under federal OSHA’s construction standard titled “Respirable crystalline silica,” which federal OSHA enforces. Illinois appears on the federal list of approved plans only among those for state and local government employees, so its own plan stops short of your private jobs. So work to federal OSHA’s construction standards on your private jobs, silica included: shrouded grinders on a vacuum, wet methods where they fit, fit-tested and documented respirators, and a written exposure control plan for each site. On a school, park district or city garage floor, ask the public owner what its safety office expects from contractors on site.

The department also runs a consultation program that private employers can use without risking a citation:

“Primarily targeted to private sector, small to medium size employers in high-hazard industries, this no-cost safety and health consultation service is completely separate from enforcement and does not issue penalties or citations.”

The department’s report says its On-Site Safety and Health Consultation Program is free, separate from enforcement and issues no penalties or citations. Ask whether a crew that grinds slabs qualifies for a visit; an outside review of your dust control, respirator fit and training is worth having before an inspector or an injury forces the question.

Those same conditions drive workers’ compensation claims: lungs irritated by dust, a hardener splash to the eye, a grinder that grabs a wrist, a back hurt hauling the machine down a basement stair. An insurer quoting an Illinois epoxy crew will ask about dust collection and respirator programs, because those answers move the price as well as how often claims arrive.

Illinois’s AIM coatings limits and the open applicator question

The rule is best read through its federal approval: As approved into Illinois’s federal air plan, Illinois limits the volatile organic compounds in architectural and industrial maintenance coatings sold, supplied, offered for sale or manufactured in the state. As the federal notices describe it, the rule binds whoever sells or makes the coating, through content limits, reporting and labeling. The federal notice summarizes its parts:

“VOC emissions limits, reporting requirements, and labeling requirements for consumer products and AIM coatings sold, supplied, offered for sale, or manufactured in Illinois.”

“35 IAC Part 223 limits the amount of volatile organic compounds from consumer products and architectural and industrial maintenance coatings.”

A later federal approval says whom the rule is meant to hold to the limits:

“This revision helps ensure that sellers of AIM coatings in Illinois comply with the VOC content limits contained in 35 IAC Part 223.”

The federal notices describe limits, reporting and labeling for coatings sold, supplied, offered for sale or manufactured in the state and name no duty on the person applying; the state’s own text, which could say more, was not read. We could not read the rule’s Illinois text itself, so this section follows the federal notices and the federal table of the state’s approved rules, and whether the state text puts any duty on the applicator is an open question. Ask the Illinois Environmental Protection Agency and your supplier whether anything in the rule reaches the person applying the coating. Questions about whether a product may be sold in Illinois belong there too.

In practice, buy coatings sold as compliant in Illinois, keep each product’s data sheet with the job file, and be wary of stretching a batch with solvent past the maker’s instructions whether or not a rule reaches you directly. Cap thinner and cleanup cans between uses; a spill or a vapor complaint in an occupied building is an insurance question even where no air rule is broken.

That insurance question lives in the pollution wording. A coating well within its limit can still push an odor into an office above a garage or a daycare next to a warehouse, and a fume complaint is where the pollution exclusion in a general liability policy gets argued. A pollution endorsement for the products you apply is worth a conversation with us, as is a separate contractors pollution policy for heavier commercial work.

What Illinois asks of an epoxy flooring business — no state license found for this work, federal OSHA on private jobsites, a coatings VOC limit and compulsory workers’ comp — and what each leaves to the insurance program.

The license is not the coverage — the program is.

  • A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it.
  • No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement.

A panel for Illinois in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor licensing: No state license found for this work; local licensing or registration may apply. It leaves open a coating that fails, or damage to the customer’s property, which General Liability and Umbrella Liability answer. Workplace safety: Federal OSHA for private jobsites; a state plan for public employers. It leaves open a crew member hurt by silica, chemicals or the grinder, which Workers Compensation answers. Coatings VOC rules: A state limit on VOCs in architectural and industrial maintenance coatings. No connector is drawn for this row. Workers’ compensation: Compulsory; bought from an authorized insurer. It leaves open an injured employee, which Workers Compensation answers. Notes: A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it. No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement. The conclusion reads: The license is not the coverage — the program is. No figures are shown.

From these rules to your insurance program

The Illinois rules above each leave a gap. Here the coverages in an epoxy flooring program are matched to those gaps, with the Illinois detail that changes each line.

Chicago’s license starts with general liability, the policy the city wants proof of and the one that pays for a floor that fails after you leave: a coating that lifts, a slick finish someone slips on, a customer’s car or racking damaged during the job. It is also where an Illinois fume complaint gets decided, so read the pollution wording before work in an occupied building.

Your crew is covered by workers’ compensation, which Illinois employers must buy or self-insure with the Commission’s permission. With stop-work orders behind the requirement, a lapse can cost you every job on the calendar, and the price itself follows how an insurer reads your dust control and how you classify your helpers.

For contracts that ask for more, umbrella liability stacks limits over general liability, commercial auto and the employers liability part of comp. A Chicago license class, a hospital or a big warehouse owner can set limits higher than a coating business carries underneath, and an umbrella can close that distance.

Every truck and trailer needs commercial auto. An Illinois crew can run from Cook County garages to St. Clair County warehouses in a week, and a personal auto policy on a work truck is the gap that shows up on the day of a crash.

Gear on the move is the job of inland marine — contractors tools and equipment, which follows the grinder, the shot blaster, the dust collector and the mixing station onto the trailer, into a customer’s garage or onto a warehouse floor overnight. When a grinder is stolen, the schedule halts, and this line pays to replace it.

Your shop and stock fall under commercial property, which covers a unit you own or lease and the resin, hardener and flake stored inside. Work out of a home garage? Say so, because a homeowner’s policy may exclude business property, and coatings inventory is squarely that.

The full program, how its lines hand off and what insurers ask before quoting, is laid out on our page covering insurance for an epoxy coating business.

Illinois markets for an epoxy crew

Listed here are several of the largest metropolitan areas that take in Illinois counties, as the U.S. Census Bureau draws them. Each card gives the Illinois counties involved and what changes for a coating business working there.

Chicago-Naperville-Elgin, IL-IN

Cook County, DeKalb County, DuPage County, Grundy County, Kane County, Kendall County, Lake County, McHenry County and Will County, with the metro running on into Indiana. Inside the Chicago city limits the city’s general contractor license and its insurance proof apply, and the license class you hold sets the coverage amount the city expects. Out in DuPage, Kane or Will County, check the permit desk of each suburb you work in before the first job there, and keep a certificate ready for whichever village asks.

St. Louis, MO-IL

Bond County, Calhoun County, Clinton County, Jersey County, Macoupin County, Madison County, Monroe County and St. Clair County, in a metro shared with Missouri. If your Madison or St. Clair County crew takes jobs on the Missouri side, tell us before the first Missouri job so the comp policy lists Missouri, and expect a Missouri owner’s certificate request to read differently from an Illinois one.

Davenport-Moline-Rock Island, IA-IL

Henry County, Mercer County and Rock Island County on the Illinois side of a metro shared with Iowa. If you coat shop floors in Iowa as well as in Rock Island County, list Iowa on the comp policy before the crew crosses, and keep the trailer’s garaging address accurate on the auto policy, since rating follows where the rig parks overnight.

Peoria, IL

Marshall County, Peoria County, Stark County, Tazewell County and Woodford County. If your Peoria and Tazewell County work runs to heavy-equipment shops and plant floors, ask the owner what loads, fluids and steel tracks the floor must carry and put it in the bid; a floor that fails under a load the owner never mentioned becomes an argument about your completed work, and the written specification settles it.

Rockford, IL

Boone County and Winnebago County. If your Winnebago or Boone County crew takes machine-shop or warehouse floors across the Wisconsin line, settle comp for Wisconsin before that job, and ask each Illinois or Wisconsin owner what its contract wants on the certificate before you bid.

Champaign-Urbana, IL

Champaign County, Ford County and Piatt County. If your work here mixes campus or clinic floors in Champaign County with machine sheds and farm shops out in Ford or Piatt County, the rig spends long stretches on rural highways, which is a commercial auto question, and a campus owner’s contract may ask for additional insured status.

Working an Illinois county that is not on these cards? The state licensing answer, the home repair duties, the comp law, the safety plan and the coatings rule above reach the whole state. The local license or permit is what varies, so call the city or village building department before a first job in a new town. Ready to price your program? Ask for a quote.

Questions about epoxy flooring insurance in Illinois

Does Illinois license floor coating?

No. The Illinois Department of Financial and Professional Regulation licenses roofing contractors, but its list carries no general, building, flooring or coating contractor license, on homes or on commercial buildings. Cities can license contractors on their own: according to the City of Chicago Department of Buildings, Chicago requires its own general contractor license for most building construction, alteration and repair work inside the city, with proof of liability insurance. Check with each city before the first job there.

What insurance does Chicago want to see for a general contractor license?

Proof of commercial general liability insurance in the amount set for the license class you apply for, written by an insurer authorized in Illinois. The City of Chicago Department of Buildings issues the licenses, so ask it which class fits your work before you apply. We issue the certificate once your general liability is bound, and we can raise limits or add an umbrella if your class calls for more.

Do I have to give an Illinois homeowner anything before a garage job?

On home jobs, yes. The Attorney General’s guide says the contractor must give the homeowner a copy of the state’s consumer rights brochure, whose text the state’s home repair law sets out. Hand it over before the work starts and keep a signed acknowledgment with the job file, alongside a written contract that describes the system you are installing.

What happens in Illinois if I get caught running a crew without comp?

You can be shut down. The Illinois Workers’ Compensation Commission’s handbook says that an employer that knowingly goes without coverage can be hit with a stop-work order until it buys insurance, and it lists other penalties as well. Employers must buy a policy or get the Commission’s permission to self-insure. Bind coverage before the first employee’s first shift, and keep the policy current when it renews.

Does IL OSHA inspect private coating jobs like mine?

No. The state plan covers public-sector worksites, and the federal list of approved state plans lists it among the plans for state and local government employees only, so private employers in Illinois fall under federal OSHA, and federal OSHA enforces its construction silica standard on a private slab you grind. A free consultation program run by the Illinois Department of Labor can look over your dust control, and it pays to run that control as though an inspector will ask.

Can I legally apply a high-VOC epoxy I bought out of state on an Illinois job?

That is an open question. The federal notices describe Illinois’s AIM limits on coatings sold, supplied, offered for sale or made in the state, and they are silent on the applicator; the state’s own rule text was not read and could say more. Buy products sold as compliant in Illinois, keep their data sheets, and ask the Illinois Environmental Protection Agency before using anything bought elsewhere.

Who do I call about an insurance problem in Illinois?

Insurance itself is regulated by the Illinois Department of Insurance. Comp coverage, self-insurance permission and penalties for going without belong to the Illinois Workers’ Compensation Commission. A Chicago license question goes to the city’s City of Chicago Department of Buildings, and jobsite safety on public worksites belongs to the Illinois Department of Labor. For anything on your own policies, call us first; we can point you to the right office.

This page describes insurance for epoxy flooring contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workplace-safety and coatings rules change; verify current requirements with the agency named before relying on them.

Get a quote for your Illinois epoxy flooring work

Let us know which Illinois counties you work, whether you hold a Chicago license and which class, and how your crew is paid, and we will put the program together around that.