Commercial property insurance covers the physical place an epoxy flooring business runs from and the things kept inside it. For a coating company, that can be a shop or small warehouse, owned or leased, holding drums and kits of resin and hardener, pigments, flake, solvents, a sample floor or two and an office. When fire, wind, theft or a burst pipe damages that building or its contents, this is the policy that pays to repair or replace them.
The trade gives the line two sharp edges. A shop that stores solvents and uncured resin has a fire exposure that a contractor without that stock does not, and the stock on its shelves is sensitive to heat and cold in ways an ordinary warehouse is not. A loss at the shop also stops the field work that depends on it, so the income side of the program matters as much as the walls. This page walks through each piece. It is one part of the program that insures an epoxy flooring business.
A hub-and-spoke diagram with the epoxy flooring shop at the center. A spoke leads to the building itself, which the owner insures, or the landlord when the space is leased. A second leads to the build-out a tenant pays for, such as a showroom slab or a mixing room, which is generally insured as improvements and betterments. A third leads to the resin, hardener, pigment, flake and solvent stock, which is business personal property. A fourth leads to the office and its records, also business personal property, sometimes with limits of their own. A fifth leads to grinders and vacuums once they leave on a trailer, which are handed to inland marine. A sixth leads to the jobs that stop while the shop is repaired, which business income and extra expense address. Your own policy wording decides any real claim. No figures are shown.
Owning the building or leasing the bay
A property policy separates the building from what is in it. The building is the structure and its permanent fixtures. Business personal property is everything you own and use in the business at the location: stock, shelving, mixing stations, office furniture, computers and the like. Who insures which depends on whether you own the shop.
If you own it, you insure both. If you lease, the landlord may insure the structure, and the lease decides the rest. Read it for three things: who must insure the building, what the tenant must carry for its own contents, and who owns the changes you make. A coating company that pours a polished showroom slab, frames an office, adds ventilation for a mixing room or upgrades the electrical for equipment chargers has put money into a building it does not own. Those changes are called improvements and betterments, and a lease can make them the tenant’s to insure even though they cannot be carried away.
Leases also tend to ask for a waiver of the tenant’s right to recover from the landlord and for the landlord to be named on the tenant’s policies. Both are routine, but both should be matched to the policy before the lease is signed rather than after.
Resin, hardener, pigment and flake on the shelves
For an epoxy business, the largest contents item can be material rather than equipment. Kits of resin and hardener, cases of polyaspartic topcoat, buckets of pigment and metallic additives, boxes of flake and drums of solvent and cleaner add up quickly, and a company that buys ahead for the busy season can hold far more stock in spring than in winter. The policy needs a contents amount that reflects the high point, not the average, or a provision that lets the amount rise with the season.
Stock destroyed by a covered cause such as fire, smoke, a roof collapse or theft is squarely what business personal property is for. Spoilage is different. A resin or hardener may need to be kept within a temperature range, and material that freezes in an unheated bay or cooks in a summer warehouse can be ruined without any fire at all. Whether that loss is covered can turn on why the temperature changed. A power outage or a failed heater may be addressed by an added coverage for spoilage or equipment breakdown; a building that was simply never heated generally is not. If your stock is sensitive, ask how the policy treats it before you need to know.
Solvent storage and the fire that defines the shop
Fire is the exposure that sets a coating shop apart. Solvents, thinners and some primers are flammable, rags and mixing waste can heat as they cure, and a shop that also charges batteries, runs propane equipment or stores fuel for grinders gathers several ignition sources in one room. A fire that starts in the storage area can reach the stock, the office and the building within minutes.
Underwriters look at that storage closely. They will want to know whether flammable liquids are kept in approved cabinets or a separate room, how much is on hand, how waste rags are handled, whether the building has sprinklers and alarms, and how far it is from a fire station. Good answers do more than earn a better price; in some cases they decide whether a property market will write the shop at all. Simple habits such as closed metal containers for rags, a dedicated mixing area away from chargers and a clear path to the exits help on the application and on the day something goes wrong.
Fire damage to a customer’s building from your work on the jobsite is a liability question, not a property one. That belongs to general liability; this policy is about your own premises.
Showroom floors, sample boards and the front office
An epoxy company may keep a showroom: a few finished bays laid in different systems, a wall of sample boards, a counter where customers choose colors and flake blends. Those floors and displays took labor and material to build, and in a leased space they can be improvements and betterments rather than contents. Sample boards and portable displays are contents. Either way they should be counted when the values are set.
The office carries its own items: computers, printers, phones, the estimating tablet and the files behind every warranty you have issued. Electronic equipment and valuable papers can have their own limits inside a property form, and records that would be costly to rebuild are worth naming when the policy is built.
A cascade read from top to bottom, each step what the step before it leaves behind. It begins with a fire that starts where solvents and waste rags are stored. The fire damages the building and destroys the resin and flake stock, which building coverage and business personal property address. With the stock gone and the shop closed, crews cannot load for the jobs already booked. The jobs that slip mean earnings are lost while the shop is repaired, which business income is built to answer. Keeping the schedule alive brings added costs, such as a rented bay or rushed replacement material, which extra expense is built to answer. Your own policy wording decides any real claim. No figures are shown.
Lost jobs while the shop is rebuilt: business income and extra expense
A fire at the shop does not only damage the building. The material for next week’s garages is gone, the trailers cannot be loaded, the showroom where customers sign is closed, and the schedule starts to slip. Business income is the part of a property program that responds to the earnings you lose while a covered loss is repaired, and it can continue to pay ongoing costs such as payroll and rent during that period.
Extra expense sits beside it. It pays the added cost of keeping work moving: renting a temporary bay, buying replacement stock at short notice, paying to have material shipped quickly, or setting up a mobile mixing station so crews can stay on the schedule. For a coating business that can keep its crews working from a borrowed space, extra expense may matter as much as lost income.
The amount and the length of time these coverages run are chosen when the policy is written. Seasonal work makes that choice harder, because a fire in the slow months and a fire in the busy months cost very different amounts of work. We set it from your own calendar, not from a rule of thumb.
Equipment that rides out to the jobsite
Property coverage is built around a described location. Grinders, dust collection vacuums, shot blasters, generators and mixers sitting in the shop are business personal property while they are there. Once they are loaded on a trailer and taken to a garage or a warehouse floor, a property form may stop covering them or cover them only in a narrow way. That gap is why coating contractors carry inland marine for their tools and equipment: it follows the gear in transit, on the jobsite and in a locked trailer overnight.
The two policies should be built together so a piece of equipment is never on neither and rarely on both. A list of the larger units, with which policy carries each, settles the question before a theft does.
A business owners policy for a smaller coating shop
A smaller company with a simple building and modest stock can package its property with its liability in a business owners policy. The package can include business income and some added coverages by default, and it can be an efficient way to insure a shop used chiefly to store material and equipment between jobs.
Not every coating business fits. Some programs keep contractors who store larger quantities of solvent, run sizable warehouses, or need liability terms the package cannot carry outside it, and those businesses are written on a standalone property policy alongside separate liability. Neither path is better in general; the right one depends on your building, your stock and your contracts. Residential and commercial coating companies can land differently, as the residential and commercial program pages explain.
Setting values the shop can actually be rebuilt for
A property problem to watch for is an amount set years ago and never revisited. Building values should reflect what it would cost to rebuild today, contents values should include the stock at its seasonal peak, and improvements and betterments should reflect what you actually put into a leased space. A policy may also apply a penalty when values are set too low against what the property was worth, which can reduce a claim even when the loss is partial.
We do not publish typical values, deductibles or rates, because each one comes from your own shop. We do walk the building with you, read the lease, list the stock and equipment, and match the property policy to the inland marine and liability policies so the whole program reads as one.