Texas has no state license for epoxy flooring, on homes or on commercial buildings: the governor’s business licensing guide says general contractors need no license to practice in the state, and the state licensing department regulates no flooring or coating trade. Your city or county may still ask something of you before you pull a permit, and Dallas is a city whose rule we could not confirm. Beyond licensing, a Texas coating business decides for itself whether to carry workers’ compensation, answers to federal OSHA on the jobsite, and faces a coatings VOC question our sources could not settle.
With so little required by the state, more of the risk stays with the business. No license card pays for a garage floor that lifts, and choosing not to carry comp leaves a crew member’s injury with you. This page sets each Texas rule beside the policy that answers what it leaves open, in the state’s own words where we quote them.
No state contractor license reaches floor coating in Texas
Texas issues no state license for epoxy floor coating, on homes or on commercial buildings: the governor’s business licensing guide says general contractors are not required to obtain a license to practice in Texas, and the state licensing department’s list of regulated industries carries no general, flooring or coating contractor. The guide’s general-contracting entry says it outright:
“General contractors are not required to obtain a license to practice in Texas.”
The licensing department points the same way. The Texas Department of Licensing and Regulation regulates trades such as air conditioning and refrigeration contracting and electrical work, and nothing on its list of regulated industries covers grinding a slab, laying a primer and body coat or broadcasting flake.
That moves the question to the local level. The guide words it like this:
“A general contractor may be subject to local (county or city) requirements and may need to coordinate with those localities.”
Its caution is worth taking literally: No state license does not mean nothing is required. The same state guide says a contractor may be subject to city or county requirements. Dallas publishes a contractor registration form, but whether it reaches floor coating could not be confirmed, so check the city or county where the job sits.
The city’s contractor registration form registers general contractors (residential and commercial, roofing, fence, foundation, demolition and pool) and certain other trades to apply for permits. Flooring and floor coating are not named on it, and whether a floor-coating job needs a city permit at all was not read, so its reach to epoxy work is not stated. Treat Dallas as unconfirmed: call the city’s building inspection office with the scope of your work, ask whether coating an existing floor needs a permit, and if it does, ask whether a registered contractor must pull it. Put the same question to Fort Worth, Houston, San Antonio, Austin and any other city before the first job inside its limits.
A resin maker’s certified-installer status is useful when an architect writes that maker’s system into a commercial specification, and some owners will ask for it. It stays a private credential between you and the manufacturer, though, and no Texas source on this page gives it the force of a license.
With no state card to show, a Texas coating business proves itself with paperwork its customers ask for. Keep general liability bound before you bid, expect general contractors and property managers to ask for a certificate naming them, and plan on reissuing it at each renewal.
Subscriber or non-subscriber: the Texas comp choice
Here is the Texas rule according to the state’s comp agency, the Texas Department of Insurance, Division of Workers’ Compensation: Workers’ compensation is optional for most private employers in Texas. An employer can buy a policy from a licensed Texas insurance carrier, be certified to self-insure, or go without coverage as a non-subscriber; a non-subscriber must report to the state that it has no coverage and must report certain injuries and deaths to the Division of Workers’ Compensation. Public bodies in Texas must carry it. Its employer page opens with that choice:
“In Texas, private employers can choose to carry workers' compensation insurance coverage, but it is not required in most cases.”
Optional does not mean minor. The Division spells out what coverage does for an employer that carries it:
“Except when gross negligence results in a fatality, coverage limits liability if an employee sues your business for damages.”
The Division says coverage limits an employer’s liability if an employee sues for damages, except when gross negligence results in a fatality; an employer without coverage does not have that limit. Choosing not to subscribe also means no policy stands ready to pay a crew member’s medical bills and lost wages after a grinder kickback, a hardener splash or a fall from a trailer. Ask us whether an employers liability part would respond if a worker sued, and before you decide, ask a Texas employment attorney what going without would expose your business to; that answer is the real price of the choice.
Going without also carries paperwork. The Division lists this among a non-subscriber’s duties:
“Must report to the state that they do not have coverage.”
Beyond that notice, a non-subscriber must report certain injuries and deaths to the Division. Ask the Division which injuries count and when the coverage notice is due, and put each on the office calendar so a filing never depends on someone remembering it.
Commercial bids bring the question back even when the state does not. A general contractor, a property owner or a facility manager can write workers’ compensation into the subcontract as a condition of the work, and a crew that cannot produce a certificate may simply lose the job. Read the insurance section of every subcontract before you price it, and if it calls for comp, treat that contract as a requirement you have to meet.
Public work has its own rule for the public body itself:
“All Texas governmental entities (public school, utility, city, or county) must have workers’ compensation coverage.”
That sentence speaks to the public body’s own coverage. If you bid a school, a city building or a county yard, read the bid documents for what the owner asks of its contractors, and ask before you price the job rather than after you win it.
If you subscribe, the policy comes from a licensed Texas insurance carrier, and we place it with insurers that write floor-coating crews; certified self-insurance is the other route the Division describes, and for a small coating business, plan on a policy. The Division pages we read set out no test for whether a helper is an employee or an independent contractor, so settle each helper’s status with your attorney or accountant before the work starts, not after an injury.
Garage jobs and commercial bids across Texas
Residential coating in Texas runs to attached garages, detached shops, metal-building workshops and the occasional patio, sold job by job to homeowners who rarely mention insurance. Trouble shows up after the crew has gone. Hot tires peel a coating that went down over a slab ground too lightly, sun through an open garage door yellows an epoxy that lacked a UV-stable topcoat, and moisture moving up through a slab on grade lifts the system in patches. Those claims belong to the completed-operations part of general liability, and our residential epoxy flooring contractor insurance page explains how they are handled.
Commercial jobs put the insurance terms ahead of the first pass of the grinder. A distribution center, a restaurant group or a plant operator will want to be named as an additional insured, want your coverage to answer before theirs, and set limits well above anything a homeowner asks about. The floor may go down overnight in a kitchen that opens for lunch or across a warehouse aisle while forklifts work the adjacent aisle, which is where fume complaints and early-traffic damage start. For those terms in detail, see our commercial epoxy flooring contractor insurance page.
A Texas crew may mix garage and commercial work. Tell us roughly how the work divides, because a program built for garage work can fall short of a warehouse contract, and a program built for commercial contracts can carry endorsements a residential crew never needs.
Federal inspectors and a state consultation service kept apart from them
On safety, the jurisdiction question has a clear answer: Texas has no OSHA-approved state plan for private employers: the federal list of approved state plans names none for Texas. The state’s own safety consultation service, run by the Texas Department of Insurance’s Division of Workers’ Compensation, helps private employers meet OSHA’s standards and says it is completely separate from federal enforcement, so the inspector on an epoxy job is federal OSHA. The federal list behind that point carries this title:
“List of Approved State Plans for Private-Sector and State and Local Government Employees”
That list passes over Texas in its private-sector part and its public-employee part alike. The state’s consultation service draws its own line between help and enforcement:
“Although the consultation program was established by the same federal legislation that created OSHA, our services are completely separate from federal enforcement.”
“OSHCON is a voluntary, non-regulatory program designed to help private Texas employers identify areas that do not meet OSHA safety and health standards.”
OSHCON, the Division of Workers’ Compensation’s consultation program, gives private Texas employers free, confidential help finding and fixing hazards and issues no citations or fines. To a coating business, that makes OSHCON a reasonable first call before a big commercial job: an outside look at your dust control and respirator program, with no citation attached.
The Division also reminds employers that the rules depend on the work:
“There may be several state and federal health and safety regulations that apply to Texas employers depending on the type of business and its operations”
Floor coating produces several of the hazards those rules address. Grinding throws fine concrete dust, resins and hardeners can burn and sensitize skin, solvent-borne primers and urethanes fill a closed space with vapor, and a Texas garage in summer adds heat on top. For grinding dust the governing rule is federal. Texas has no approved state plan, so the federal construction rule for “Respirable crystalline silica” reaches a private Texas slab, and federal OSHA, not OSHCON, enforces it. Plan each Texas slab around that standard: shrouded grinders on dust collection vacuums, wet cutting where the coating system allows it, respirators fit-tested and documented for each person near the grinder, and a written dust plan kept on every site.
Whether you subscribe or not, injuries follow the same causes: dust in the lungs, a hardener splash to the eyes, a grinder that grabs, heat exhaustion in an unventilated garage. Workers’ compensation is the policy built to pay for them, and an insurer pricing a Texas crew will ask about the same controls an inspector would.
An unsettled VOC question for Texas floor coatings
For coatings, here is how far our reading got: As approved into Texas’s federal air plan, Texas’s coating rules reach factory and shop coating in named ozone areas around Beaumont-Port Arthur, Bexar County, Dallas-Fort Worth, El Paso and Houston: appliances, metal furniture, metal parts, wood products, aircraft and vehicle refinishing. The parts of the rule we read list no category for architectural or floor coatings, but the division on surface coating processes was not read, so whether any Texas rule caps the VOC content of a floor coating is not confirmed. The state air agency’s guide to the rule reads like a factory floor plan, not a jobsite. Among the requirements it lists:
“Vehicle refinishing (body shops) primer or primer surfaces requirements”
The approved plan files the rule under this heading:
“Division 2: Surface Coating Processes”
In the parts we read, the picture is this: The regional surface-coating rule is written for coating operations at facilities, listed category by category; floor and architectural coatings are not among the listed categories. The agency behind the rule is the Texas Commission on Environmental Quality.
Treat the question as open. If you coat floors in Houston, Dallas-Fort Worth or another named ozone area, ask the Texas Commission on Environmental Quality whether any limit in its surface coating rules reaches the products in your floor system, and ask your supplier the same question. This page also does not cover the federal architectural coating limits that apply in every state, so ask your supplier whether each product is sold as compliant, keep the data sheet in the job file, and thin only as the label directs.
Whatever the air rules turn out to say, a fume claim is its own risk. A floor that meets every limit can still send odor through an office suite, a clinic or a restaurant dining room, and the complaint that follows is where the pollution exclusion in general liability comes into play. Talk to us about whether your general liability includes a pollution endorsement suited to your products, or whether a separate contractors pollution policy fits your commercial work.
The license is not the coverage — the program is.
- A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it.
- Coatings VOC rules is not verified at the state level, so no line is drawn from it.
A panel for Texas in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor licensing: No state license found for this work; local licensing or registration may apply. It leaves open a coating that fails, or damage to the customer’s property, which General Liability and Umbrella Liability answer. Workplace safety: Federal OSHA inspects private jobsites. It leaves open a crew member hurt by silica, chemicals or the grinder, which Workers Compensation answers. Coatings VOC rules: Not verified at the state level. No connector is drawn for this row. Workers’ compensation: Not compulsory for every employer; bought from insurers by those who carry it. It leaves open an injured employee, which Workers Compensation answers. Notes: A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it. Coatings VOC rules is not verified at the state level, so no line is drawn from it. The conclusion reads: The license is not the coverage — the program is. No figures are shown.
From these rules to your insurance program
Texas asks little of a coating business up front, so the program does more of the work. Below, each policy in an epoxy flooring program takes up a gap from the sections above, with the Texas detail that shapes each line.
First comes general liability, the policy behind every certificate a general contractor or property manager asks for, and the one that answers a floor that fails after you leave: a coating that lifts, a slick finish someone falls on, a customer’s truck or shelving damaged during the job. With no state license to point to, expect a commercial customer to check this policy before anything else.
For private work in Texas, the comp section above sets out the choice to carry workers’ compensation. If you subscribe, we place the policy with a licensed insurer; if you do not, we can help you weigh the exposure, keep the non-subscriber filings in view, and tell you before a contract demands coverage you lack.
Larger contracts call for umbrella liability, which sits over general liability, commercial auto and, if you subscribe, the employers liability part of your comp policy. A distribution center, a hospital or a school district sets its limits in the contract, not in Texas law, and an umbrella can carry a coating business up to them.
Long drives are part of Texas work, and commercial auto covers the trucks and trailers that haul the rig between metros, suburbs and rural shop floors. Put a work truck on a personal auto policy and the coverage question tends to come up the day of an accident.
Grinders, shot blasters, dust collectors and mixing gear belong on inland marine — contractors tools and equipment, which follows the equipment on the trailer, in a customer’s garage or left overnight on a commercial site. A stolen grinder stops the schedule, and this line replaces it.
Any shop or warehouse space you own or lease, plus the resin, hardener and flake stock stored there, goes on commercial property. Operating the business out of a home garage? Tell us, because a homeowner’s policy can be written to leave business property out, and coatings inventory is exactly that.
For the whole program, how the policies hand off to each other and what insurers ask before they quote, read our page on insurance for an epoxy flooring business.
Coating work across the Texas metros
These are the largest metropolitan areas in Texas by the Census Bureau’s population estimates. Under each metro you will find its Texas counties and what changes for an epoxy business that works there.
Dallas-Fort Worth-Arlington, TX
Collin County, Dallas County, Denton County, Ellis County, Hunt County, Johnson County, Kaufman County, Parker County, Rockwall County, Tarrant County and Wise County, spread along the forks of the Trinity River. Dallas is the city whose registration form we could not tie to floor coating, so treat each city in this metro as its own question: a crew that coats a garage in Collin County on Monday and a warehouse in Tarrant County on Thursday may face a different permit counter at each. Ask every city before the first job inside its limits.
Houston-Pasadena-The Woodlands, TX
Austin County, Brazoria County, Chambers County, Fort Bend County, Galveston County, Harris County, Liberty County, Montgomery County, San Jacinto County and Waller County, around Galveston Bay and the ship channel. Bidding a floor in the refineries, chemical plants or port warehouses along that water? Expect the owner’s contractor-safety program and insurance clause to run long, possibly with a comp certificate required whatever the state allows, and send us the contract before you price the job.
San Antonio-New Braunfels, TX
Atascosa County, Bandera County, Bexar County, Comal County, Guadalupe County, Kendall County, Medina County and Wilson County, reaching from the San Antonio River out into the Hill Country of Kendall and Bandera County. When your work includes barn, shop and garage floors on rural properties out there, the rig spends long hours on county roads and the equipment may sit overnight at an unattended site, so put the trucks on commercial auto and schedule the grinders and dust collectors on inland marine.
Austin-Round Rock-San Marcos, TX
Bastrop County, Caldwell County, Hays County, Travis County and Williamson County, along the Colorado River from Bastrop up through Williamson County. If you coat floors in new commercial or office buildings in Travis or Williamson County as a subcontractor under a general contractor, look for additional insured, waiver of subrogation and workers’ compensation demands in the subcontract, and send it to us before you sign.
McAllen-Edinburg-Mission, TX
Hidalgo County, on the Rio Grande across from Mexico. If a customer asks you to coat a floor on the Mexican side of the river, talk to us before you agree, and ask whether your policies would reach a job in Mexico and how the crew would be covered there.
El Paso, TX
El Paso County and Hudspeth County, at the far western tip of the state where the Rio Grande meets the New Mexico line. If an El Paso crew takes work across that line, settle before the first job there how your workers are covered under New Mexico’s rules, and confirm that your general liability lists New Mexico as a state where you work.
Working somewhere in Texas we have not named? The licensing picture, the comp choice and federal OSHA apply across the state, and the coatings question above is worth raising with your supplier wherever you work. What varies is the city, so call the local building department before the first job in a new one. To price your own program, get a quote.