States · New Hampshire

Epoxy Flooring Business Insurance in New Hampshire

New Hampshire’s licensing office runs no contractor board, its comp law reaches any employer with a payroll, federal OSHA holds private jobsites and its VOC chapter sets no limit on floor coatings applied on the job. Below, each of those rules sits next to the policy that answers what it leaves open.

A worker pulls a squeegee through a pool of dark epoxy on a large commercial floor — epoxy flooring business insurance in New Hampshire

Epoxy floor coating has no board in New Hampshire’s state licensing office, on homes or on commercial buildings: the statute that lists the boards inside the Office of Professional Licensure and Certification carries no general, building, home improvement, flooring or coating contractor board. On that list, then, a coating crew finds no state board to answer to; a city or town may still set permit or registration rules of its own, and this page did not read them. What reaches every crew with a payroll is the state’s comp law, which is compulsory, and an employer that fails to secure coverage may be assessed civil penalties for each day of noncompliance, up to a year. Private jobsites belong to federal OSHA, and the state’s VOC chapter sets no limit on floor coatings applied on the job.

Fewer state rules do not mean fewer claims. A garage floor that peels, a customer who slips on a fresh topcoat and a helper who strains a back lifting a grinder all arrive whether or not a license stands behind the business. Without a state board setting a floor under the trade, the customer’s contract and the certificate request decide what you carry. The sections that follow take New Hampshire’s rules in the order they bear on a coating business and pair each with the coverage that does the paying.

A board list with no place for floor coaters

New Hampshire’s licensing office runs no board for epoxy floor coating, on homes or on commercial buildings: the state law that lists the boards inside the Office of Professional Licensure and Certification carries no general, building, home improvement, flooring or coating contractor board. The statute introduces its list in plain terms:

“The boards within the office of professional licensure and certification shall consist of:”

The entries that come closest to construction license separate trades, such as electricians, mechanical trades, home inspectors and manufactured housing, and floor coating is not among them. The list words its mechanical and home inspector entries this way:

“Mechanical licensing board under RSA 153:27-a.”

“Board of home inspectors under RSA 310-A:186.”

Read those lines for what they tell a coating contractor about scope. If a customer asks your crew to reset a floor drain, wire a heated slab or move a gas line before the coating goes down, that task sits close to a licensed trade, so check with the board that licenses it and hand the work to a holder of that license rather than folding it into your bid. Collect that contractor’s certificate of insurance and keep it in the job file.

Local rules are the open question. A city or town may have its own permit or registration requirements, and we did not read any, so this page states none. Before you bid work in a new town, call its building or code office with the scope of the job, ask whether a permit or registration applies to floor coating, and ask whether the office wants a certificate of insurance before your crew starts.

No state contractor credential in the sources read sets an insurance condition, so nothing at the state level fixes a minimum your liability policy has to meet. That puts the decision with you and your customers. Certificates come up unevenly: a homeowner may not ask at all, while a property manager, a general contractor or a facilities department will, and the limits and endorsements they ask for become the real standard. Pick general liability limits that fit the largest job you want to be able to accept, not to what a state office would demand.

Garage floors and commercial floors call for different paperwork

On the residential side, the claims that reach a New Hampshire coating business come late. Hot tires lift a system that was laid over a slab ground too lightly, a basement floor blisters because nobody tested the concrete for moisture, and a flake finish turns slick under wet boots. Each lands as a completed-operations claim months after the invoice is paid. Put a moisture test and a written surface-preparation step into every home bid, photograph the slab before you prime it, and keep the product data sheets with the job file so the record of what you did survives the crew’s memory. For how a program handles that kind of loss, see our residential epoxy flooring contractor insurance page.

Homeowners also hand you their property for the length of the job. A car left in the garage, shelving pushed into a corner or a water heater taped off near the work area can all be damaged, and the homeowner will look to your general liability when they are. Ask the customer to clear the space in writing, and tell us if your crews store equipment in a customer’s garage overnight.

Commercial work turns that around. Contracts come with every warehouse, restaurant kitchen, dealership service bay and clinic corridor, and the contract decides the insurance before a grinder is unloaded. Expect requests for additional insured status, coverage that responds ahead of the owner’s own, a waiver of subrogation, and limits well above what a homeowner would think to ask for. The schedule shifts to nights and weekends while the building stays open, which is where odor complaints and early-traffic damage begin. You will find those contract terms set out in detail on our commercial epoxy flooring contractor insurance page.

A New Hampshire coating business may take garage jobs and warehouse floors in the same month. Let us know how the work divides, because a program shaped around garages can fall short of a warehouse contract, and a program shaped around commercial accounts can carry endorsements a residential crew pays for and never uses.

Comp is compulsory, and the state sells no policy of its own

Under the comp law, a private employer in New Hampshire with employees must secure workers’ compensation, and an employer that fails to do so may be assessed civil penalties for each day of noncompliance, up to a year. No state fund sells the policy; the routes are a licensed insurance company or proof to the labor commissioner that the business can pay benefits itself. The comp law draws the line that brings a coating crew in through its definition of a private employer:

“who employs one or more persons whether in one or more trades, businesses, professions or occupations”

The statute then names the routes to compliance. The insurance route reads this way:

“By insuring and keeping insured the payment of such compensation with a company licensed to write workers' compensation insurance in this state”

Self-insurance, the alternative route, runs through the labor commissioner. Plan on a policy unless your business has the size and the reserves to carry its own claims, and ask the commissioner’s office what that proof involves before you count on it. Our practice is to place workers’ compensation for coating contractors with private insurers that write the trade, and with no state fund in the picture, the comparison is between those insurers on classification, claim handling and price.

Going without coverage is expensive in its own right. The statute’s penalty provision reads:

“An employer subject to this chapter who fails to comply with the provisions of RSA 281-A:5 by not securing payment of compensation may be assessed a civil penalty”

Coverage filings and those penalties are administered by the New Hampshire Department of Labor. Treat any lapse as an emergency: if a renewal notice goes unanswered or a payment bounces, call us the same day, because the penalty exposure and an uninsured injury can arrive together.

Helpers are where New Hampshire’s law bites hardest. New Hampshire’s comp law presumes anyone who performs services for pay is an employee, and the presumption is overcome only by proof that the person meets every one of a list of criteria, such as control over how and when the work is done, hiring and paying their own helpers, and holding themselves out as a business. The definition puts the presumption in these words:

“who performs services for pay for an employer, is presumed to be an employee”

Calling someone a subcontractor on an invoice does not settle the matter. Before a helper or another crew works on your floor, decide whether that person meets every criterion on the statute’s list, and if there is any doubt, put the person on your payroll and your policy. If another business takes part of a large job, ask for its own comp certificate before it starts, keep the copy in the job file, and make in-force coverage a condition of the subcontract.

Grinding dust, respirators and the federal inspector

No OSHA-approved state plan exists for New Hampshire: the federal list of approved state plans names none for the state, for private employers or for public employees, so a private epoxy contractor’s jobsites fall to federal OSHA. That conclusion rests on a federal list titled as follows:

“List of Approved State Plans for Private-Sector and State and Local Government Employees”

With no New Hampshire plan on that list, a private coating crew answers to the Occupational Safety and Health Administration on safety. A school, a town hall or a state building is a public workplace with an employer of its own, so ask the facility manager what safety plan and paperwork that employer wants from a contractor on its premises before the crew arrives.

On silica, the answer is federal as well: absent an approved plan for the state, the construction standard on respirable crystalline silica is federal OSHA’s to enforce on a private New Hampshire site. Your questions about slab grinding and shot blasting belong with the Occupational Safety and Health Administration: what written exposure records and respirator documentation it expects an employer to keep.

Do not wait for an inspection to run the job properly. Shroud every grinder and connect it to a vacuum rated for the dust, fit-test and document every respirator, write a short dust-control plan for each site, and train the crew to follow it. An inspector who arrives on a commercial job will ask for paperwork, and so will an insurer pricing the crew.

The injuries a coating crew suffers are steady and predictable: lungs irritated by concrete dust, skin and eyes reacting to amine hardeners, a hand caught when a grinder grabs, a back strained loading machines onto a trailer. Those are the losses workers’ compensation pays for, and an insurer quoting a New Hampshire crew will ask about dust collection, respirator fit and training because the answers move how often those claims happen.

A VOC chapter aimed at stationary sources, not floor crews

New Hampshire’s volatile organic compound rule sets no limit on architectural or floor coatings applied on the job: it applies to listed categories of stationary sources, such as coating of metal furniture, metal and plastic parts and wood furniture, and the federal table of New Hampshire’s approved air rules lists no architectural coatings rule. The chapter’s applicability section opens like this:

“This chapter shall apply to processes and devices in the following stationary source categories which emit or have the potential to emit the threshold amounts of VOCs specified in the cited part:”

What follows in the chapter is a list of stationary source categories, among them storage tanks and terminals, plants and coating lines; none of them is a floor coating category. The furniture entry is a sample:

“Wood furniture, burial caskets, and gunstock coating, Env-A 1213;”

No state rule read limits what an applicator may put down on a floor. The rule’s coating categories are stationary-source operations above emission thresholds, not field application. New Hampshire’s approved air rules, as the federal table lists them, carry the chapter under this heading:

“Env-A 1200 Volatile Organic Compounds (VOCs) Reasonably Available Control Technology (RACT)”

For a coating contractor working inside New Hampshire, then, no state VOC limit governs the epoxy, urethane or polyaspartic you put down on the job. Plenty still governs the choice of product. A commercial customer’s specification may name a low-VOC system for its own reasons, a building with occupants may require a product that cures with little odor, and a manufacturer’s data sheet sets the mixing and thinning limits its warranty depends on. Follow the data sheet, keep it in the job file, and ask the New Hampshire Department of Environmental Services if a question about a specific operation comes up.

Work across state lines calls for another check. If a job takes you into Massachusetts, Vermont or Maine, check that state’s coatings rule before you order product, because a system that is fine at home may not be what the neighboring rule allows.

The absence of a limit does not remove the fume claim. A solvent-heavy primer laid down over a weekend can still drift into an office above the shop, a dining room next to the kitchen or a classroom wing that reopens Monday, and a complaint about fumes is where the pollution exclusion in a general liability policy gets tested. Have us confirm whether your policy carries a pollution endorsement for the products you apply, or whether a separate contractors pollution policy fits your commercial accounts better.

What New Hampshire asks of an epoxy flooring business — no state contractor license, federal OSHA, no state coatings VOC rule and compulsory workers’ comp — and what each leaves to the insurance program.

The license is not the coverage — the program is.

  • A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it.
  • No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement.

A panel for New Hampshire in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor licensing: No state license or registration found that reaches floor coating. It leaves open a coating that fails, or damage to the customer’s property, which General Liability and Umbrella Liability answer. Workplace safety: Federal OSHA inspects private jobsites. It leaves open a crew member hurt by silica, chemicals or the grinder, which Workers Compensation answers. Coatings VOC rules: No state VOC rule found that reaches floor coatings. No connector is drawn for this row. Workers’ compensation: Compulsory; bought from an authorized insurer. It leaves open an injured employee, which Workers Compensation answers. Notes: A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it. No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement. The conclusion reads: The license is not the coverage — the program is. No figures are shown.

From these rules to your insurance program

Every rule above leaves part of the risk unpaid. Here is how each line of an epoxy flooring program meets the New Hampshire detail that bears on it.

Claims for a floor that fails after the crew leaves, a slick finish someone falls on or a customer’s car damaged during the job go to general liability. With no state credential setting a minimum, your customers’ contracts set the limits, so check its pollution wording before you take work in occupied buildings.

Compulsory workers’ compensation is the New Hampshire line that reaches any employer with a payroll, with civil penalties that may be assessed for each day of noncompliance, up to a year, and the employee presumption is worth settling for every helper before the work begins. With no state fund, we place it with private insurers that write floor-coating crews and keep certificates moving to the customers who ask.

Hospital, school and warehouse contracts can ask for limits above what general liability carries on its own, and umbrella liability is how a coating business reaches them. Its layer rests on general liability, commercial auto and the employers liability part of workers’ compensation.

The trucks and trailers that carry grinders from job to job belong on commercial auto, listed where they park overnight. A work truck on a personal auto policy is a gap that shows itself on the day of an accident.

Equipment travels: grinders, shot blasters, dust extractors and mixing gear go from site to site, and inland marine — contractors tools and equipment travels with them: on the trailer, in a customer’s garage or locked overnight inside a building under construction. A fast replacement for a stolen grinder is what keeps the schedule intact.

A leased bay or a shop behind the house holds resin, hardener and flake stock that commercial property protects. Home-garage operations are worth raising with us, because a homeowner’s policy can omit business property.

For how the lines fit together and what insurers ask before quoting, visit our overview of epoxy coating business insurance.

Census metros that reach into New Hampshire

These metropolitan areas are drawn by the U.S. Census Bureau, and this list names every metropolitan area that takes in a New Hampshire county. Under each metro name you will find the New Hampshire counties involved and what changes for a coating business working there.

Boston-Cambridge-Newton, MA-NH

Rockingham County and Strafford County. These New Hampshire counties belong to a metro the Census Bureau draws across the line into Massachusetts, so a crew based here can find its calendar filling with Massachusetts jobs without anyone deciding to expand. Before a crew crosses, call us with the job address and ask whether a policy written around a New Hampshire payroll needs an addition before it answers for an injury on a Massachusetts slab.

Manchester-Nashua, NH

Hillsborough County. The whole of this metro sits in that county, so a crew that keeps to it works under New Hampshire’s comp law alone and the variable becomes the local office. Check with the building department in Manchester, in Nashua and in each surrounding town about what it wants from a floor contractor before a permit, and if your accounts here lean toward plant, lab or warehouse floors, expect contracts that ask for additional insured status and umbrella limits.

Working somewhere else in the state? The comp, safety and coatings rules above apply statewide. The local permit office and what it wants on file change from town to town, so call ahead before a crew starts. With the details in hand, ask for a quote.

Questions about epoxy flooring insurance in New Hampshire

Will New Hampshire make me get a contractor license before I coat a garage or shop floor?

Not from the state, on the statute we read. The statute listing the boards inside the Office of Professional Licensure and Certification carries no general, building, home improvement, flooring or coating contractor board, and that holds for homes and commercial buildings alike. The boards it does list cover separate trades such as electricians and mechanical work. A city or town may have rules of its own, so call the local office before you bid.

Could the town I am working in have its own rules for floor contractors?

It could, and we have not read any, so we state none. A city or town may run its own permit or registration rules, and a phone call settles it. Call the building or code office with your scope of work, ask whether a permit or registration applies to floor coating, and ask whether it wants a certificate of insurance on file before your crew arrives.

I just put a helper on the payroll. Is comp mandatory for me now?

Yes. New Hampshire’s comp law defines a private employer as anyone who employs persons in a trade or business, and a subject employer must secure compensation through a company licensed to write it in the state or through proof to the labor commissioner that it can pay benefits itself. Have the policy bound ahead of the helper’s opening shift, not after, and keep the certificate where your office can find it.

What does New Hampshire do to a contractor caught without comp?

The comp law lets the state assess a civil penalty against an employer that fails to secure compensation, and the state’s comp law allows civil penalties for each day of noncompliance, up to a year. Coverage filings and penalties sit with the New Hampshire Department of Labor. Do not wait for a penalty notice to act: an injury during a gap has no policy behind it, so close any lapse the day you find it.

If I call my helper a sub instead of an employee, does that keep the helper off my comp policy?

Not automatically. New Hampshire’s comp law presumes that anyone who performs services for pay is an employee, and the presumption gives way only to proof that the person meets every criterion on a list, such as controlling how and when the work is done and holding themselves out as a business. Settle each person’s status before the job, collect their own comp certificate, and ask us if anything is unclear.

Does New Hampshire cap the VOCs in the epoxy my crew lays down?

Not under the state rule we read. The state’s VOC chapter applies to listed stationary-source categories, such as coating of metal furniture and wood furniture, and sets no limit on architectural or floor coatings applied on the job. That does not end the fume question: a strong odor in an occupied building can still become a claim, so read the pollution wording in your liability policy.

Who would show up to inspect a grinding crew on a New Hampshire job?

Federal OSHA. No plan for New Hampshire appears on the federal list of approved state plans, so a private contractor’s jobsites fall to the Occupational Safety and Health Administration. That agency enforces the construction silica standard on those sites too, so ask it what written records it expects, and run dust control on every job as though an inspector will ask to see it.

My crew has a floor lined up in Massachusetts. What should I change before the job?

Call us before the job, and ask whether your comp policy needs to be changed for that state: a policy written around a New Hampshire payroll may need an addition before it responds to an injury on a Massachusetts slab. Give us the address, the scope and the customer’s insurance requirements, and confirm in writing how your liability and comp will respond. The same call applies to work in Vermont or Maine.

This page describes insurance for epoxy flooring contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workplace-safety and coatings rules change; verify current requirements with the agency named before relying on them.

Get a quote for your New Hampshire epoxy flooring work

Tell us which New Hampshire towns your crews work in, how much of the calendar goes to homes against businesses, whether any jobs cross into Massachusetts, Vermont or Maine, and who draws a paycheck, and we will build the program from there.