States · North Dakota

Epoxy Flooring Business Insurance in North Dakota

North Dakota licenses epoxy contractors by the size of the job, sells workers’ compensation through its own fund and leaves jobsite safety to federal OSHA. Here is how each rule fits with the insurance an epoxy business carries.

A worker in spiked shoes walks across a wet, glossy coat, pushing a squeegee on a long pole — epoxy flooring business insurance in North Dakota

An epoxy flooring business in North Dakota needs a contractor license from the North Dakota Office of the Secretary of State on any job whose cost, value or price passes the dollar line written into state law, whether the floor is in a home or in a commercial building. That license is not a coating credential: state law defines a contractor broadly enough to reach anyone in the business of building, repairing or altering buildings, and the class of license follows the largest job the contractor may take on. Around the license sit workers’ compensation bought from North Dakota Workforce Safety & Insurance and no private insurer, federal OSHA on private jobsites, and air rules with no coatings chapter.

A floor that fails is a claim no rule on that list will pay. A license will not rebuild a peeling garage slab in Fargo, the state fund will not answer a customer whose car was splashed in Bismarck, and federal safety rules will not replace a grinder taken from a trailer in Minot. What follows takes the North Dakota rules in the order an epoxy owner meets them and puts the matching insurance beside each.

A dollar line decides when North Dakota wants you licensed

Applied to an epoxy business, the licensing law works like this: North Dakota requires a contractor license from the Secretary of State for epoxy floor coating once a job passes the dollar line set in state law, on homes and on commercial buildings alike: the law’s definition of a contractor reaches anyone in the business of building, repairing or altering buildings and other improvements to property, and the license comes in classes set by the largest single job the contractor may take on. The North Dakota Office of the Secretary of State states the trigger on its own licensing page:

“When the cost, value, or price of a job exceeds $4,000, the person doing the work must be licensed as a contractor in North Dakota”

The trigger is the job, not the trade. Grinding, priming, broadcasting flake and topcoating are not named in the law, and they do not need to be, because the definition of a contractor covers building work in general:

“"Contractor" means any person engaged in the business of construction, repair, alteration, dismantling, or demolition of bridges, highways, roads, streets, buildings,”

For an owner, that means watching each bid against the line. Price the whole job as the customer will pay for it, grinding and crack repair and topcoat together, and if that figure passes the line, have the license in place before the work starts. Splitting a large floor into small invoices to stay under it is the sort of arrangement to talk through with the North Dakota Office of the Secretary of State beforehand rather than to try. Pick the class of license with your largest planned job in mind, since the class sets the ceiling on what you may take on.

Insurance is part of getting the license, not something added after. To get the license, a contractor files a certificate of liability insurance naming the Secretary of State as certificate holder and proof of workers’ compensation coverage from Workforce Safety & Insurance, renews every year, and gives the license number when a building permit is pulled. Trade licenses such as electrical and plumbing are separate and are not part of this license. The statute puts the paperwork this way:

“A copy of a certificate of liability insurance must be filed with the application and the contractor shall submit a statement from North Dakota workforce safety and insurance”

The license application must include a certificate of liability insurance in the license name, with the Secretary of State as certificate holder, and a certificate of payment or good-standing letter from Workforce Safety & Insurance; the Secretary of State marks a license not in good standing when the contractor fails to keep the required liability insurance, and each renewal carries a new certificate of liability insurance. The licensing page names the certificate holder down to the street address:

“The certificate must list the North Dakota Secretary of State, 600 E Boulevard Ave, Dept 108, Bismarck, ND 58505, as the certificate holder.”

Your general liability policy is therefore a condition of the license itself. Get the policy bound ahead of the application, ask us for a certificate in the exact license name with the North Dakota Office of the Secretary of State shown as holder, and calendar the renewal so a new certificate goes in with it. A lapse in the liability policy puts the license out of good standing, so treat the renewal date as a deadline.

We read no city page in North Dakota, so this page states no local contractor rule. Ask the building department in each city where you work whether it keeps a registration or license of its own, and keep its answer with your job papers. A manufacturer’s installer certification is worth holding when a specification calls for that system, but it is the manufacturer’s credential and stands apart from the state license.

Comp in North Dakota comes from the state fund, not from us

This is the section that changes how an epoxy business buys insurance here. Put simply, North Dakota is a monopolistic workers’ compensation state: North Dakota Workforce Safety & Insurance is the sole provider of the coverage, state law does not let private insurers write it, and with limited exceptions every employer must insure its workers there before they start. A general contractor is liable for premium a subcontractor leaves unpaid on its work. The fund says it plainly on its coverage page:

“WSI is the sole provider and administrator of workers’ compensation in North Dakota.”

And it closes the door on any private alternative:

“North Dakota law does not allow private insurers to underwrite workers' compensation insurance in North Dakota.”

So your North Dakota workers’ compensation is not a policy we place, and no private insurer can sell you that coverage for North Dakota work. You open an employer account with North Dakota Workforce Safety & Insurance and pay premium into the fund. No self-insurance route appears in the state sources we read, so plan on the fund for every North Dakota employee, and open the account before the hire starts, since the fund expects employers to insure their workers before they begin.

The fund and the license are tied together. The license application carries a statement from North Dakota Workforce Safety & Insurance, so open the fund account before you apply for the license. Keep the certificate of payment current and keep a copy where you can find it on short notice, because a commercial customer may ask for proof of comp as well as proof of liability coverage.

Subcontracting brings its own exposure. The comp law reaches the contractor above a sub that does not pay:

“A general contractor and a subcontractor are liable for payment of premium and any applicable penalty for an employee of a subcontractor or independent contractor that does not secure required coverage or pay the premium owing.”

When another crew does your grinding, shot blasting or a broadcast on a big floor, its unpaid premium on your job can land on you. Ask each sub for its certificate of payment from the fund and a certificate of liability insurance before it arrives, check that the coverage runs through the job dates, and make current coverage a written condition of the subcontract.

Classifying helpers is the next place an owner can get caught. The law starts from a presumption of employment:

“Each individual who performs services for another for remuneration is presumed to be an employee of the person for which the services are performed”

That presumption gives way only when the person is shown to be an independent contractor under the common-law test, and the party claiming contractor status carries the burden of showing it. The agency applies that common-law test when it reviews a relationship. A helper paid by the day who uses your grinder and follows your schedule is the case to settle on paper, with the fund if you are unsure, before work begins rather than after an injury.

Stop-gap cover is worth raising. Ask us whether employers liability, the cover owners call stop-gap, belongs on your general liability program for North Dakota work: the state sources we read say nothing about employers liability for North Dakota work, and whether an insurer will add it, and what it would respond to, comes down to the insurer and the policy wording. Read any offer with us before you count on it.

If an insurer’s handling of your liability, auto or property policy troubles you, the North Dakota Insurance Department is the state’s insurance regulator. Comp account questions belong with the fund itself.

Home garages and commercial slabs under the same license rule

The licensing law draws no line between a homeowner’s garage and a warehouse aisle: it reaches homes and commercial buildings alike, under the same dollar line. Where the residential and commercial sides of an epoxy business differ is in the customers, the contracts and the claims.

Picture a home job as a garage, a basement or a shop building, sold to a homeowner who may never ask for a certificate. The trouble comes later. Where a slab was not ground to a good profile, the coating lets go under hot tires, de-icing salt and meltwater tracked in all winter work at the finish, and moisture coming up through an older basement slab can push the system off in blisters. Those losses come back under the completed operations part of general liability, and our residential epoxy flooring contractor insurance page explains how that part responds.

Commercial customers put their demands on paper before the crew arrives. A distribution building in Fargo, a clinic in Bismarck or a shop floor on a farm operation can ask to be named as an additional insured, want your policy to answer ahead of its own, and set limits matched to its risk. Commercial work can also happen at night or over a weekend in a building that stays partly in use, which is where odor complaints and traffic on a finish that has not cured start to become claims. The contract side has its own page: our commercial epoxy flooring contractor insurance page.

Should your business work on each side, give us a rough split of residential and commercial revenue when you apply. Coverage shaped for garages can fall short of a commercial contract, and a program built for commercial contracts may carry endorsements a garage crew never uses.

Without a state plan, federal OSHA covers North Dakota jobsites

On safety, the answer is direct: North Dakota has no OSHA-approved state plan: the federal list of approved state plans names none for North Dakota, so private jobsites in the state, an epoxy crew’s included, fall to federal OSHA. Behind that statement stands a federal list with this title:

“List of Approved State Plans for Private-Sector and State and Local Government Employees”

That list shows no North Dakota plan for private employers or for public ones, and that absence is the basis for sending your jobsite questions to the Occupational Safety and Health Administration, whether the floor is a garage in Grand Forks or a public building.

Silica falls on the same side of the line. With no North Dakota plan standing between a private construction site and the federal agency, the Occupational Safety and Health Administration enforces its own construction standard on respirable crystalline silica here. Slab dust from a North Dakota grinder or shot blaster is therefore measured against that federal standard. North Dakota Workforce Safety & Insurance runs safety programs and grants, so ask the fund what those programs offer an employer like you. Whatever the job, run shrouded grinders on a vacuum with a filter rated for fine dust, fit-test and document respirators for anyone near the grinder, and write a dust plan for each job.

Silica in a worker’s lungs, an amine hardener burn, a blast hose that whips loose, a back strained loading a planetary grinder onto a trailer: those are the injuries workers’ compensation exists for, and in North Dakota the fund pays them. Dust control and training cut how often they happen.

Air rules written for tanks and separators, not for floors

As approved into North Dakota’s federal air plan, North Dakota’s rules carry no coatings rule: the state’s only organic compounds chapter covers petroleum separators, storage tanks, tank-car and tank-truck loading, pumps and compressors, and the disposal of organic gases, so no North Dakota rule sets a coating VOC limit for the crew applying a floor system. In the federal table, the chapter appears under this title:

“33.1-15-07. Control of Organic Compounds Emissions”

Its entries speak to facilities, not to applicators. The table names a requirement aimed at building them:

“Requirements for construction of organic compounds facilities”

Turning to the rule text itself, its coverage opens with petroleum handling:

“Water separation from petroleum products.”

The organic compounds chapter’s provisions address separators, tanks, loading, pumps and compressors and the disposal of organic gases; none of them names coating work or the person applying a floor coating. The rules sit with the North Dakota Department of Environmental Quality. What this means on a job is narrow: the state rules we read do not reach a contractor rolling a body coat in a garage, and they say nothing about the VOC content of a floor system. Product questions remain open even so. Have your supplier tell you what limits each product in your system is sold under, keep the product data sheet and safety data sheet in the job file, and if a plant customer runs its own permitted equipment, ask its environmental contact whether your work inside the plant touches its air paperwork.

Fumes remain an insurance matter even where the air rules are silent. A low-odor coating can still carry a smell into a restaurant, an apartment over a garage or an office that reopens in the morning, and a complaint from that smell is where the pollution exclusion in a general liability policy gets tested. Check whether your policy carries a pollution endorsement for the products you apply, or whether a contractors pollution policy fits your commercial work better.

What North Dakota asks of an epoxy flooring business — a state contractor license for some work, federal OSHA, no state coatings VOC rule and workers’ comp through the state fund — and what each leaves to the insurance program.

The license is not the coverage — the program is.

  • A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it.
  • No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement.
  • Workers’ compensation there comes from the state fund, or self-insurance where the state allows it, never from a policy we place, so no line is drawn from this row.

A panel for North Dakota in rows. Each row sets a requirement of the state beside the exposure that requirement leaves open and the coverage line that answers it. Contractor licensing: A state contractor license for some of the work, issued by the North Dakota Office of the Secretary of State. It leaves open a coating that fails, or damage to the customer’s property, which General Liability and Umbrella Liability answer. Workplace safety: Federal OSHA inspects private jobsites. It leaves open a crew member hurt by silica, chemicals or the grinder, which Workers Compensation answers. Coatings VOC rules: No state VOC rule found that reaches floor coatings. No connector is drawn for this row. Workers’ compensation: Compulsory for covered employment; the state fund, or self-insurance where the state allows it — not a private insurer. No connector is drawn for this row. Notes: A license or registration is a condition the state sets on the work or its permits, not insurance, so no line is drawn from it. No line is drawn from the coatings row: ask whether your general liability excludes pollution, and about a pollution endorsement. Workers’ compensation there comes from the state fund, or self-insurance where the state allows it, never from a policy we place, so no line is drawn from this row. The conclusion reads: The license is not the coverage — the program is. No figures are shown.

From these rules to your insurance program

The North Dakota rules above decide who may work and who answers to whom; the policies below decide who pays. Each line carries the North Dakota detail that shapes it.

The license asks to see general liability: its certificate goes to the North Dakota Office of the Secretary of State with the application and again at each renewal. The same policy answers the floor that fails after you leave, the slip on a fresh finish and the customer property damaged while the crew works. Before any job in an occupied building, read its pollution wording, and ask whether employers liability can attach to it.

For workers’ compensation, North Dakota work is covered by North Dakota Workforce Safety & Insurance, not by us. Our part is the work around it: keeping your liability program in step with the fund, collecting certificates of payment from the subs you hire, and raising the question of out-of-state jobs before a crew leaves for Minnesota, South Dakota or Montana.

Umbrella liability adds a layer over general liability, commercial auto and any employers liability you carry. The limits a hospital, a school district or a food plant puts in its contract come from that contract and not from North Dakota law, and an umbrella is the line designed to reach them.

Every truck and trailer hauling grinders and resin between Fargo, Bismarck, Grand Forks and Minot belongs on commercial auto. Winter driving raises the stakes on every trip, and a work truck left on a personal auto policy is a gap that tends to show on the day of a crash.

Equipment such as grinders, shot blasters, dust collectors and mixing gear belongs on inland marine — contractors tools and equipment, which follows the equipment on the trailer, in a customer’s garage or parked overnight in a farm shop. Losing a grinder stops the schedule, and this line pays to replace it.

Your shop, owned or rented, and the resin, hardener and flake stock inside it fall under commercial property. Cold can ruin resin stored in an unheated building through a North Dakota winter, so ask how your policy treats spoiled stock, and tell us if the business runs from your home garage, since a homeowners policy can leave business property out.

How these lines work together, and what an insurer asks before quoting, is laid out on our page on the policies an epoxy floor business carries.

Where North Dakota epoxy crews find their work

The metro areas below take in North Dakota counties as the Census Bureau defines them, and together they are every metro area the bureau draws with a North Dakota county. Every note lists the counties on the North Dakota side and what shifts for a coating business there.

Fargo, ND-MN

On the North Dakota side, this metro is Cass County; the Census Bureau carries the rest of it over the line into Minnesota. Should a Cass County crew cross that line for a job, ask us and the state fund ahead of time how those workers are covered on the Minnesota side, and get the answer in writing before the crew goes.

Bismarck, ND

This metro spans Burleigh County, Morton County and Oliver County. A job that needs a building permit means giving the state license number at the permit counter, so keep the license in good standing and the liability certificate on file before you bid here, and confirm with each building department you deal with what else it asks of a contractor.

Grand Forks, ND-MN

Inside North Dakota, this metro is Grand Forks County, and its other share lies in Minnesota. A property manager on the Minnesota side may want a certificate that lists Minnesota work, and a general liability policy written around North Dakota addresses may not show it, so tell us before any Minnesota job in this market which towns across the line your crews will reach.

Minot, ND

Here the metro takes in McHenry County, Renville County and Ward County. When a Ward, Renville or McHenry County job is a shop floor, a machine shed or an equipment bay on a farm, put that on your application: a building with fuel, chemicals or heavy machinery close by is a different exposure from a garage in town, and an insurer will want to know.

Coating floors outside these metros? The license line, the state fund, the federal safety basis and the air rules above hold statewide. The permit counter is the piece that varies by town, so call the local building department before a job in a place you have not worked. To get started, request a quote.

Questions about epoxy flooring insurance in North Dakota

Will North Dakota make me get a contractor license to coat a garage floor?

It will when the job is big enough. The North Dakota Office of the Secretary of State says the person doing the work needs a state contractor license once a job’s cost, value or price passes the line set in state law, on homes and commercial buildings alike. Jobs under that line do not trigger it. The class you need follows the largest job you plan to take on, so check the classes before bidding big work.

Can you write the workers’ comp policy for my North Dakota employees?

No. North Dakota’s comp coverage is sold by North Dakota Workforce Safety & Insurance and nobody else; state law does not let a private insurer underwrite it. It is not a policy we place. You open the account with the fund directly. What we can do is build the rest of the program around it, and you can ask us whether employers liability, sometimes called stop-gap, makes sense on your general liability program.

What has to go in with my North Dakota license application?

A certificate of liability insurance in the license name, listing the North Dakota Office of the Secretary of State as holder, plus a certificate of payment or a good-standing letter from North Dakota Workforce Safety & Insurance. The license renews each year with a fresh liability certificate and loses good standing if the required liability insurance lapses. We can issue the certificate worded exactly as the office’s page asks.

Could I owe the state fund for a subcontractor who skipped coverage?

Yes, on work done under you. Under the state’s comp law, a general contractor and a subcontractor are liable for premium and penalty when a sub or independent contractor fails to secure coverage or leaves premium unpaid. Before a sub starts on your job, ask for its certificate of payment from the fund, keep the copy with the job file, and write current coverage into the subcontract.

How does North Dakota decide whether my helper counts as an employee?

The law starts from the employee side. A person paid to perform services for another is presumed to be that person’s employee, and the presumption holds unless the person is shown to be an independent contractor under the common-law test, with the burden on whoever claims contractor status. Put each helper’s status on paper before work begins, and take a close case to North Dakota Workforce Safety & Insurance.

Is it a state safety office or federal OSHA that oversees my grinding crew?

Federal OSHA. No North Dakota entry appears on the federal list of approved state plans, so private jobsites fall to the Occupational Safety and Health Administration. Its construction silica standard is enforced by that agency on those jobs too, so ask it what written plan and exposure records it expects from a small crew grinding slabs.

Are there state VOC limits on the epoxy I roll out in North Dakota?

None, in the state rules we read. North Dakota’s approved air plan holds an organic compounds chapter, but that chapter deals with petroleum separators, storage tanks, tank-car and tank-truck loading, pumps and compressors and the disposal of organic gases, and none of its provisions names coating work. Each product’s limits are a question for your supplier, and the data sheets belong with the job.

This page describes insurance for epoxy flooring contractors operating in this state. It is general information, not legal advice and not a statement of coverage. Licensing, workplace-safety and coatings rules change; verify current requirements with the agency named before relying on them.

Get a quote for your North Dakota epoxy flooring work

Tell us which North Dakota counties you work in, how much of your book is garages versus commercial floors, and whether your helpers are on payroll, and we will put the program together around that.