Additional insured vs waiver of subrogation comes down to direction. A contract may ask for an additional insured endorsement to bring the general contractor or owner under your liability policy, and for a waiver of subrogation to keep your insurer from pursuing them after a paid loss. Your certificate can only report what your endorsements say.
Additional insured vs waiver of subrogation, side by side
A contract may use the additional insured request to add someone to your coverage, and the waiver request to take away a right your insurer would otherwise hold. A general contractor’s insurance section may list them in the same paragraph. They are not the same thing, and a contract may ask for them separately.
Think about who each request is meant to help. The additional insured request is about the general contractor’s place under your policy when a claim names it over your work; ask your agent what the endorsement does on your policy. The waiver request is about your insurer’s right, after paying a claim, to pursue the general contractor or owner to get its money back; ask your agent to confirm in the endorsement wording what the waiver gives up.
You will not find a definition of these endorsements in a government glossary. The NAIC glossary of insurance terms has no entry for additional insured, and no entry for a waiver of subrogation. What regulators do describe is subrogation, endorsements and the certificate of insurance, and those pieces explain the rest. Everything below that goes past what the regulators say is offered as a question to ask, not a promise of how your policy reads.
What an additional insured endorsement changes on your policy
A contract may use an additional insured endorsement to ask that another party be treated as an insured under your policy. The NAIC defines the building block this way: «Endorsement - an amendment or rider to a policy adjusting the coverages and taking precedence over the general contract.» It also defines the party you already are: «Named Insured - the individual defined as the insured in the policy contract.»
The Washington State Office of the Insurance Commissioner puts the insured in plain terms: «Insured — The individual or party who the insurance company agrees to cover for losses or provide benefits or service.» A contract may ask you to widen that circle beyond your own business to a party it names, such as the general contractor, the building owner or a property manager. Ask your agent what the endorsement does on your policy for that party.
How far any widening goes depends on the endorsement wording. Ask whether it reaches only the time your crew is on site, or your finished floor as well, and read our post on completed operations coverage before you answer a contract that asks about finished work. Ask how the endorsement relates to your general liability policy’s exclusions and limits. The Georgia bulletin quoted below says the insurance a certificate refers to «is subject to all the terms, exclusions, and conditions of the policy itself.»
Subrogation and the right a waiver gives away
Regulators describe subrogation as an insurer’s right to recover what it paid from whoever caused the loss, and a contract may ask for a waiver of that right against a named party. The NAIC says: «Subrogation - situation where an insurer, on behalf of the insured, has a legal right to bring a liability suit against a third party who caused losses to the insured.» It adds: «Insurer maintains the right to seek reimbursement for losses incurred by insurer at the fault of a third party.»
The Washington glossary says the same in everyday words: «Subrogation — This allows the insurance company to recover the payment it made to the person it insures from the person responsible for the damages or their insurance company.» Policies carry that right in their own text, which the NAIC calls the «Subrogation Clause - section of insurance policies giving an insurer the right to take legal action against a third party responsible for a loss to an insured for which a claim has been paid.»
A contract may ask for a waiver of subrogation endorsement to switch that clause off for the parties it names. If the general contractor’s crew contributed to a loss your insurer paid, ask your agent whether your endorsement would keep your insurer from pursuing the general contractor for it. Ask your agent which of your policies the contract wants the waiver on, because a subcontract may ask for it on more than your general liability, including your workers compensation.
The certificate summarizes the policy and changes nothing
A certificate of insurance summarizes your policy; it does not add to it. The Georgia insurance department’s certificate bulletin says: «These certificates provide concise summaries of insurance policies, outlining key details such as policy limits, effective dates, and coverage types.» It also says why general contractors ask for them: «They serve as important tools for demonstrating compliance with legal requirements, contractual obligations, and risk management practices.»
Then comes the line every coating sub should know: «Certificates of insurance, however, do not amend, alter, or extend the coverage provided by the policy of insurance to which the certificate refers.» The Texas Department of Insurance certificate FAQ is just as direct: «A certificate cannot say anything that is not the same as what is stated in the insurance policy.»
Texas guidance also keeps the subcontract off the certificate: «A certificate of insurance may not contain a reference to a legal or insurance requirement contained in a contract other than the underlying contract of insurance, including a contract for construction or services.» So in Texas, a certificate that points to the subcontract’s terms is not something your agent should produce. Elsewhere, ask your agent what your state’s rules allow on a certificate.
The boxes on the certificate follow the endorsements
The additional insured box and the waiver of subrogation box are checked only when an endorsement names the certificate holder. The Texas FAQ says: «You should check the “Additional Insured” box if the policy includes an endorsement that names the certificate holder as an additional insured.» For the waiver it says: «You should check the “Waiver of Subrogation” box if the policy includes a Waiver of Subrogation endorsement that names the certificate holder.»
Blanket endorsements are handled differently. Asked whether a certificate may name the holder as an additional insured when the policy carries only a blanket endorsement, the Texas answer is: «No, though the certificate can state that the policy contains a Blanket Additional Insured endorsement.» The answer for the waiver follows the same pattern: «No, though the certificate can state that the policy contains a Blanket Waiver of Subrogation endorsement.» The Georgia bulletin gives matching answers for its agents.
For an epoxy sub, the practical step is to know which kind you carry. If your policy uses blanket wording, expect the certificate to state that the endorsement exists instead of naming the holder, and be ready for a general contractor’s office to ask for the endorsement page.
Being a certificate holder is not being an insured
Holding your certificate gives a general contractor no rights under your policy on its own. The Texas FAQ says: «A certificate holder may not use the “Certificate Holder” box to imply or confer any new or additional rights beyond what the policy or any executed endorsement of insurance provides.»
That sentence explains a mix-up that can happen on commercial bids. A project manager may assume that sending your certificate to their office put them on your policy. It did not. If the subcontract asks for additional insured status, ask your agent whether your insurer has issued an endorsement that does it; the certificate only reports what the policy says.
The Texas guidance also says it «does not prohibit an agent or insurer from providing a copy of the policy or endorsements.» When a general contractor wants proof beyond the certificate, ask your agent for the endorsement pages. Sharing the actual wording settles more questions than a reworded certificate ever could.
Real-World Scenario: A coating sub wins a bid to recoat the floors in a grocery store’s back rooms during overnight closures. The general contractor’s subcontract asks for additional insured status on a primary and noncontributory basis and a waiver of subrogation. The sub’s office sends a certificate with the boxes checked out of habit, without confirming what the endorsements say. Weeks later the general contractor’s risk manager asks for the endorsement pages, and the sub learns that its blanket wording reaches only work under way. The sub and its agent sort out the gap before the next job starts.
Primary and noncontributory: a phrase to ask about
None of the regulator sources we rely on define primary and noncontributory wording, so treat it as a phrase to have your agent explain against your own wording. A subcontract may put it in the same sentence as the additional insured request.
The questions to ask are practical. Does your policy contain an endorsement that speaks to how your coverage responds alongside the general contractor’s own insurance? Does it apply only when a written contract asks for it? Does it apply to the additional insured endorsement you carry, or to a different endorsement? If the answer is no, the certificate cannot fix it, for the reasons the Texas and Georgia guidance gives above.
The Georgia bulletin closes the door on contract language overriding the policy: «Notwithstanding any requirement, term, or condition of any contract or other document with respect to which a certificate of insurance may be issued or may pertain, the insurance afforded by the referenced policy of insurance is subject to all the terms, exclusions, and conditions of the policy itself.»
Hold-harmless wording sits beside these requests
The indemnity clause in a subcontract is a separate promise from the endorsements, and your general liability treats it under its own rules. The Texas Department of Insurance guide to commercial general liability says: «Contractual Liability - CGL policies exclude coverage for bodily injury or property damage that you are obligated to pay because you assumed liability in a contract or agreement.»
It then describes the exception: «Liability assumed in a contract or agreement defined in the policy as an insured contract, if the bodily injury or property damage occurs after the contract or agreement is executed.» And it adds a qualifier: «Your CGL policy may provide coverage to indemnify the other party depending on the wording of the indemnity agreement.»
So an epoxy sub reading a general contractor’s insurance section is reading related requests: who becomes an insured, whose recovery rights are waived, and what you promise to pay for in the indemnity. For how a general contractor uses those clauses once a claim comes in, see our page for commercial epoxy flooring contractors.
Questions to settle before you sign the subcontract
Before you agree to the insurance section, put these to your agent and compare the answers with the contract:
- Which additional insured endorsement does my policy carry, and does it name parties or use blanket wording tied to a written contract?
- Does it reach my finished floors, or only the time my crew is on site?
- Which waiver of subrogation endorsement do I carry, and on which policies does the contract want a waiver?
- How does my policy respond when the contract asks for primary and noncontributory wording?
- Does my umbrella liability policy extend to an additional insured the way my general liability does?
- Can you send the endorsement pages if the general contractor asks for them?
These questions belong with commercial work, where a written subcontract sets the insurance terms. A residential coating contractor may meet these endorsements only when bidding a commercial job. Our post on winning commercial customers covers the certificate request that can arrive before the bid is awarded.
When you build or review your epoxy flooring business insurance, ask for the endorsements a general contractor is likely to request to be part of the conversation from the start. If you would like us to read a subcontract’s insurance section against your policy, send it with your quote request, or read more about who we are.